Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Lista de Produto
Modelo: oval tubes
marca: Huijie
Pacote: Pacote de pacotes, caixa de madeira
produtividade: 3000 tons/month
transporte: Ocean
Lugar de origem: Zhejiang, China
Apoio sobre: 3000 tons/month
Certificados : ISO9001-2008, TS16949
Código HS: 73043190
porta: Shanghai,Ningbo
Tipo de pagamento: T/T
Incoterm: FOB,CFR,CIF,FCA
JIS G3445 STKM11A STKM12C STKM13C tubos de aço em forma ovais internos redondos externos para bucha de borracha automática
Tubulação mecânica sem costura de aço carbono e liga
Aplicações: Para auto bucha de borracha
Faixa de tamanho: OD: 6-168mm WT: 1-15mm L: max12000mm
Categoria de aço JIS G3445 STKM11A, 12C, 13C ou outro, compisition químico:
Propriedades mecânicas:
JIS3445 | C | Si | Mn | P | S | Nb or V | Tention Test | Flateniug | Bendability | ||||
Symbol |
T.S. N/mm^2 |
Y.P. N/mm^2 |
Elongation | ||||||||||
No 4,11,12 Test pe |
No 4,5 Test pe |
Distance Between Flatened Plates |
Band Angle |
Inside Radius |
|||||||||
STKM11A | 0.12 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 290 min. | . | 35 min. | 30 min. | 1/2D | 180 | 4 D |
STKM12A | 0.20 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 340 min. | 175 min. | 35 min. | 30 min. | 2/3D | 90 | 6 D |
STKM12B | 390 min. | 275 min. | 25 min. | 20 min. | 2/3D | 90 | 6 D | ||||||
STKM12C | 470 min. | 355 min. | 20 min. | 15 min. | . | . | . | ||||||
STKM13A | 0.25 max. | 0.35max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 370 min. | 215 min. | 30 min. | 25 min. | 2/3D | 90 | 6 D |
STKM13B | 440 min. | 305 min. | 20 min. | 15 min. | 3/4D | 90 | 6 D | ||||||
STKM13C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM14A | 0.30 max. | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 410 min. | 245 min. | 25 min. | 20 min. | 3/4D | 90 | 6 D |
STKM14B | 500 min. | 355 min. | 15 min. | 10 min. | 7/8D | 90 | 8 D | ||||||
STKM14C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM15A | 0.25 to 0.35 | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 470 min. | 275 min. | 22 min. | 17 min. | 3/4D | 90 | 6 D |
STKM15C | 580 min. | 430 min. | 12 min. | 17 min. | . | . | . | ||||||
STKM16A | 0.35 to 0.45 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 510 min. | 325 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM16C | 620 min. | 460 min. | 12 min. | 7 min. | . | . | . | ||||||
STKM17A | 0.45 to 0.55 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 550 min. | 345 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM17C | 650 min. | 480 min. | 10 min. | 5 min. | . | . | . | ||||||
STKM18A | 0.18 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 440 min. | 275 min. | 25 min. | 20 min. | 7/8D | 90 | 6 D |
STKM18B | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 8 D | ||||||
STKM18C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM19A | 0.25 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
STKM19C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
/D | 0.25 max. | 0.55 max. | 1.60 max. | 0.040 max. | 0.040 max. | 0.15 max. | 540 min. | 390 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
1. A variação da espessura não pode levar a parede a desvios-limite relativos à espessura da parede.
2. Na seção transversal do tubo, o desvio do ângulo reto não pode ser superior a ± 1,5 °.
3. A curvatura do tubo não pode exceder 2 mm por 1 m de comprimento.
Os tubos são produzidos sem ajuste, neste caso a curvatura não é regulada.
Tolerances on OD |
|
Division |
Tolerance on OD |
No.1 |
under 50mm ±0.5mm
50mm or over ±1%
|
No.2 |
under 50mm ±0.25mm
50mm or over ±0.5%
|
No.3 |
under 25mm ±0.12mm
25mm or over to and excel.40mm ±0.15mm
40mm or over to and excel.50mm ±0.18mm
50mm or over to and excel.60mm ±0.20mm
60mm or over to and excel.70mm ±0.23mm
70mm or over to and excel.80mm ±0.25mm
80mm or over to and excel.90mm ±0.30mm
90mm or over to and excel.100mm ±0.40mm
100mm or over ±0.50%
|
Nota 1. Para tubos de aço sem costura acabados a quente, deve ser aplicada a tolerância no. 1 do diâmetro externo.
2.A tolerância no diâmetro externo dos tubos temperados e temperados deve ser conforme acordado pelo comprador e pelo fabricante.
Tolerances on WT |
|
Division |
Tolerance on WT |
No.1 |
under 4mm +0.6mm -0.5mm
4mm or over +15%-12.5%
|
No.2 |
under 3mm ±0.3mm
3mm or over ±10%
|
No.3 |
under 2mm ±0.15mm
2mm or over ±8%
|
Grupo de Produto : Tubos de aço de perfil > Tubos de aço em forma
Página inicial > Lista de Produto > Tubos de aço de perfil > Tubos de aço em forma > Tubos de aço em forma oval para bucha de borracha
Enviar Inquérito
Mr. Kevin
Número De Telefone:86-0574-87491308
Fax:86-0574-84491848
Celular:+8613355844917
E-mail:sales@hjbearingtube.com
Endereço:Industrial Park, Zhangting Town,Yuyao City, Ningbo, Zhejiang
Site móvel
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.